No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPFV3/4/OSPFV3_CONFLICT_ROUTERID_INTF

OSPFV3/4/OSPFV3_CONFLICT_ROUTERID_INTF

Message

OSPFV3/4/OSPFV3_CONFLICT_ROUTERID_INTF: OSPFv3 router ID conflict is detected on the interface.(ProcessId=[USHORT], RouterId=[STRING], AreaId=[STRING], InterfaceName=[STRING], InstanceId=[ULONG], IpAddr=[STRING], PacketSrcIp=[STRING])

Description

A router ID conflict was detected on an OSPFv3 interface.

Parameters

Parameter Name Parameter Meaning
ProcessId Indicates the ID of a process.
RouterId Indicates the ID of a router.
AreaId Indicates the ID of an area.
InterfaceName Indicates the name of an interface.
InstanceId Indicates the ID of an instance.
IpAddr Indicates an IP address.
PacketSrcIp Indicates the source address of a packet.

Possible Causes

The router IDs of directly connected interfaces conflicted.

Procedure

  1. Run the router-id router-id command to change the router ID.
  2. End.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 540090

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next