No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



MFIB/4/CNT_OVER_MAX:The muticast forword table counter [current-value] exceeds the max valid value [max-value]. It should be [updated-value]. (Protocol=[STRING], Vpn=[STRING], FileLine=[STRING][STRING])


The counter of the multicast forwarding table reached the maximum count, which should be updated.


Parameter Name Parameter Meaning
[current-value] Indicates the current count of the counter.
[max-value] Indicates the maximum count of the counter.
[updated-value] Indicates the value to be updated.
Protocol Indicates the flag of IPv4 or IPv6. The values are Protocol=IPv4 and Protocol=IPv6.
Vpn Indicates the name of a VPN instance.
FileLine Indicates the name of the source code file and the line number of this log message.

Possible Causes

The counter of the multicast forwarding table reached the maximum count.


  • Run the display diagnostic-information command to save the command output, and contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 545837

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next