No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SW_SNPG/4/PORT_EVT_IGNORE

SW_SNPG/4/PORT_EVT_IGNORE

Message

SW_SNPG/4/PORT_EVT_IGNORE:An event of port notification is ignored by IGMP Snooping.

Description

A port notification message is ignored.

Parameters

Parameter Name Parameter Meaning
None None

Possible Causes

The VRF index is greater than the threshold (1023).

Procedure

  1. Run the display igmp-snooping port-info command to check information about group member ports in all VLANs. Find the groups that are no longer needed based on the command output, and then run the reset igmp-snooping group vlan vlan-id group-address group-address command in the user view to delete redundant IGMP snooping entries.
  2. Run the display igmp-snooping vlan configuration command to check the IGMP snooping configuration. Find the VLANs that are no longer used based on the command out, and then run the undo igmp-snooping enable command in views of these VLANs to disable IGMP snooping.
  3. Re-configure multicast services. If this log persists, go to step 4.
  4. Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 568457

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next