No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CSPF/4/MAX_SRLG_REACH

CSPF/4/MAX_SRLG_REACH

Message

CSPF/4/MAX_SRLG_REACH: The number of SRLGs reached the upper limit of CSPF.

Description

The number of SRLGs reached the upper limit of CSPF.

Parameters

None.

Possible Causes

CSPF cannot add more SRLG in TEDB since the number of SRLGs configured has reached the maximum value that CSPF supports.

Procedure

  1. If better service is needed, contact with Huawei engineer to increase corresponding PAF value.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 576188

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next