No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



L2V/3/LDP_MSG_ERR:Received an error or unknown signal message. (MessageType=[STRING], PeerIpAddress=[STRING], ErrorReason=[STRING])


Received an error or unknown signal message.


Parameter Name Parameter Meaning
MessageType Indicates the type of message.
PeerIpAddress Indicates the remote ip address.
ErrorReason Indicates the reason of the error.

Possible Causes

The received L2VPN LDP signaling packets had an error or unknown field. The remote device might be a non-Huawei device.


  1. Check whether the signaling packet sent from the remote device complies with the RFC.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 546738

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next