No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ALML/5/LOGOUT:The user succeeded in logging out of output mode. (UserType=[STRING], Ip=[STRING], Command=[STRING])


The user exited from the redirection mode.


Parameter Name Parameter Meaning
UserType Indicates the user type.
Ip Indicates the server IP address.
Command Indicates the command used to exit from the redirection mode.

Possible Causes

The user pressed Ctrl+D to exit from the redirection mode after using the set output-mode [ canbus ] slot slot command in the diagnosis view to enter the redirection mode.


  • This log message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 551916

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next