No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



L2IFPPI/4/MAC_ARP_WARN:The MAC address update ARP command has been configured, and this command will degrade the performance of slot [STRING].


After the switch is enabled with MAC address triggered ARP entry update, the performance of slot may deteriorate.


Parameter Name Parameter Meaning

Possible Causes

The switch is enabled with MAC address triggered ARP entry update. This log is generated when the switch has the LE1D2S04SEC0, LE1D2X32SEC0, LE1D2H02QEC0 cards or X series cards installed.


  1. If MAC address triggered ARP entry update is not required, disable MAC address triggered ARP entry update globally. If MAC address triggered ARP entry update is required, no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 553475

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next