No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDT/6/PORTID_QUITVLAN

LDT/6/PORTID_QUITVLAN

Message

LDT/6/PORTID_QUITVLAN: Interface[STRING] has quit vlan[INTEGER] and will drop packet, because of detecting loop. (SendPacketPort=[Interface])

Description

The interface was removed from the VLAN where a loop was detected.

Parameters

Parameter Name Parameter Meaning

Interface

Interface name

vlan

VLAN where a loop has occurred

SendPacketPort

Name of the interface that sends loopback detection packets

Possible Causes

A loop existed in the VLAN.

Procedure

  • Remove the loop.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 574561

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next