No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALML/0/POWER_DC1600_FAULT

ALML/0/POWER_DC1600_FAULT

Message

ALML/0/POWER_DC1600_FAULT:Power is invalid for not supporting DC1600.(PhysicalName=[STRING])

Description

A 1600 W DC power module is installed on the switch, but the switch does not support this power module.

Parameters

Parameter Name Parameter Meaning
PhysicalName Indicates an entity name.

Possible Causes

The switch does not support 1600 W DC power modules.

Procedure

  • Remove the 1600 W DC power module or replace it with a power module supported by the switch.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 570467

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next