No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).





The number of IP addresses added to the UCL group for dynamic user authorization exceeded the upper limit.


Parameter Name Parameter Meaning
  • The UCL group IP feature is not supported.
  • The UCL group IP is referred by '%s'.
  • The UCL group IP exists.
  • The UCL group IP does not exist.
  • The UCL group IP is up to the max number %lu.
  • Invalid UCL group IP subnet.
  • Invalid UCL group IP subnet mask.
  • The UCL group subnet overlaps with another configuration.
  • The local-access-user's ip conflicts with another user.

Possible Causes

The number of IP addresses in the UCL group exceeded the upper limit.


  1. Check whether the UCL group for dynamic user authorization is proper on the server.

    • If so, replace the device with a higher-performance device.
    • If not, plan a proper UCL group for dynamic user authorization on the server.

  2. Collect log and configuration information, and contact technical support personnel.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 543433

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next