No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE/3/STORMCTRL_MC_FAIL

SECE/3/STORMCTRL_MC_FAIL

Message

SECE/3/STORMCTRL_MC_FAIL: Failed to block multicast packets from the Interface [STRING] because the hardware resources are insufficient.

Description

An interface fails to block multicast packets because ACL resources are insufficient.

Parameters

Parameter Name Parameter Meaning
[STRING] Indicates the interface name.

Possible Causes

ACL resources are insufficient.

Procedure

  1. Run the display acl resource [ slot slot ] command to view information about ACL resources, including ACL4 and ACL6 resources.
  2. Run the display current-configuration command to check the current configuration on the switch.
  3. Check the services that occupy ACL resources based on ACL resource information and the current configuration as follows, and delete unnecessary services to release ACL resources.

    • Check whether NAC, IPSG, MQC, and ACL-based simplified traffic policy services that occupy a large amount of ACL resources exist on the switch.
    • Check the services that occupy ACL resources based on fields in the ACL resource information. For example, MQC, ACL-based simplified traffic policy, SVF, MPLS, and BFD for VPLS services occupy UDF ACL resources. If a large amount of UDF ACL resources are occupied, check these services first.

  4. If the fault persists, collect log information and configuration information, and then collect log information and configuration information, and then contact technical support personnel. For details, see Troubleshooting-Information Collection-Collecting Diagnostic Information.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 546052

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next