No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RRPP/4/SPECCHANGE

RRPP/4/SPECCHANGE

Message

RRPP/4/SPECCHANGE:The RRPP specifications were changed in the new version. (Spec=[STRING], Value=[ULONG])

Description

The RRPP specifications changed when ISSU was implemented on RRPP modules.

Parameters

Parameter Name Parameter Meaning
Spec Indicates the items of RRPP specifications. The items are as follows:
  • RRPP_MAX_RING_NUM

  • RRPP_MAX_DOMAIN_NUM

  • RRPP_MAX_RING_ID

  • RRPP_MIN_RING_ID

  • RRPP_MAX_DOMAIN_ID

  • RRPP_MIN_DOMAIN_ID

  • RRPP_CTRLVLAN_UPPER

  • RRPP_CTRLVLAN_LOWER

  • RRPP_HELLO_TIMER_UPPER

  • RRPP_HELLO_TIMER_LOWER

  • RRPP_FAIL_TIMER_UPPER

  • RRPP_FAIL_TIMER_LOWER

Value Indicates the values of RRPP specifications. The values are as follows:
  • Maximum number of supported RRPP rings.

  • Maximum number of supported RRPP domains.

  • Largest ring ID supported.

  • Smallest ring ID supported.

  • Largest domain ID supported.

  • Smallest domain ID supported.

  • Largest control VLAN ID supported.

  • Smallest control VLAN ID supported.

  • Maximum value of the Hello timer supported.

  • Minimum value of the Hello timer supported.

  • Maximum value of the Fail timer supported.

  • Minimum value of the Fail timer supported.

Possible Causes

The RRPP specifications changed when ISSU was implemented on RRPP modules.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 569799

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next