No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SW_SNPG/3/MSG_INVALID_NEXTHOP

SW_SNPG/3/MSG_INVALID_NEXTHOP

Message

SW_SNPG/3/MSG_INVALID_NEXTHOP:Alloc a next hop index failed. (Vlan=[LONG], SrcAddr=[STRING], GrpAddr=[STRING])

Description

The next hop index failed to be allocated.

Parameters

Parameter Name Parameter Meaning
Vlan Indicates a VLAN ID.
SrcAddr Indicates a source IP address.
GrpAddr Indicates a group IP address.

Possible Causes

The number of multicast forwarding entries has reached the upper limit.

Procedure

  1. Run the display igmp-snooping port-info command to check group member port information in all VLANs. Or run the display l2-multicast forwarding-table vlan [ vlan-id ] command to check Layer 2 multicast forwarding entries in a specified VLAN.
  2. Find the groups that are no longer needed based on the command output, and then run the reset igmp-snooping group vlan [ vlan-id ] group-address [ group-address ] command in the user view to delete redundant Layer 2 multicast forwarding entries. In this way, index resources can be released. Then re-configure multicast services. If this log persists, go to step 3.
  3. Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 540997

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next