No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



RM/4/PFX_MID_NUM_CLEARED:The number of [table_name] prefixes in public instance reduced to [current_prefix_number], which was below the threshold value [threshold_number].


The number of route prefixes fell below that supported by the system.


Parameter Name Parameter Meaning
[table_name] Indicates an IPv4 or IPv6 routing table.
[current_prefix_number] Indicates the number of route prefixes in the routing table.
[threshold_number] Indicates the maximum number of route prefixes supported by the system.

Possible Causes

Cause 1:

The network administrator deleted some routes from the routing table or the number of routes learned by dynamic protocols decreased due to network topology changes.

Cause 2:

The threshold of route prefixes supported by the system was increased or the limit on the number of route prefixes was deleted.


  1. This alarm message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 540023

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next