No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HA/6/RESTART

HA/6/RESTART

Message

HA/6/RESTART:When deciding whether to restart slave board, the user choose [Y/N].

Description

The user determined whether to reset the standby main board.

Parameters

Parameter Name Parameter Meaning
[Y/N] Users chose [Y/N] to determine whether to reset the standby main board.
  • Y: indicates that the user determines to reset the standby main board.

  • N: indicates that the user determines to cancel the operation.

Possible Causes

After running the slave restart command, the user needs to confirm.

Procedure

  1. This log message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 550094

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next