No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE/4/PORT_ATTACK_OCCUR

SECE/4/PORT_ATTACK_OCCUR

Message

SECE/4/PORT_ATTACK_OCCUR:Auto port-defend started.(SourceAttackInterface=[STRING], AttackProtocol=[STRING])

Description

Port attack defense is started.

Parameters

Parameter Name Parameter Meaning
SourceAttackInterface Indicates the attack source interface.
AttackProtocol Indicates the protocol type of attack packets.

Possible Causes

When the device detects attack packets on an interface, the device starts attack defense on the interface.

Procedure

  1. Check whether the attack actually occurs on the interface.
  2. If an attack actually occurs, locate the attack source. If no attack occurs, reconfigure the port attack defense function to ensure that valid protocol packets can be sent to the CPU.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 539740

Downloads: 37

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next