No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF/6/BACKUP_LENGTH_ERR

OSPF/6/BACKUP_LENGTH_ERR

Message

OSPF/6/BACKUP_LENGTH_ERR:The data length was unidentifiable in the restoration process. (Type=[STRING], Length=[USHORT])

Description

During data restoration on the SMB, the length of TLV messages cannot be recognized.

Parameters

Parameter Name Parameter Meaning
Type Indicates the type of the data.
Length Indicates the length of the data.

Possible Causes

The length of TLV messages was inconsistent.

Procedure

  1. Run the display current-configuration ospf command to check whether configurations on the AMB and SMB are the same. If so, go to Step 3; if not, go to Step 2.
  2. If some commands are only used on the AMB, configure them on the SMB.
  3. Contact contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 571917

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next