No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SOCKET/6/FGETVPNNAME

SOCKET/6/FGETVPNNAME

Message

SOCKET/6/FGETVPNNAME:The current socket failed to obtain the VPN name. (ErrorCode=[ULONG])

Description

The current socket failed to acquire the VPN name.

Parameters

Parameter Name Parameter Meaning
ErrorCode Indicates an error code. The error codes are shown as follows

4: indicates that the input parameter is invalid.

5: indicates that the VRF name is inexistent.

7: indicates that the VRF is in the inactive state.

Possible Causes

A socket was closed, and then the VPN information about the closed socket was recorded into the log. During the process to acquire the VPN information, a fault occurred, and the relevant VPN information could not be acquired.

Procedure

  1. This log message indicates a normal situation, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 547806

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next