No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDP/4/FAILALLOCTOKEN

LDP/4/FAILALLOCTOKEN

Message

LDP/4/FAILALLOCTOKEN:Cannot allocate a token to FEC [ip-address]. (NextHop=[ULONG1], ErrorStatus=[ULONG2])

Description

Failed to allocate a token for FEC.

Parameters

Parameter Name Parameter Meaning
[ip-address] Indicates the IP address of FEC.
NextHop Indicates the IP address of the next hop.
ErrorStatus Indicates the returned errored status when allocating a token was failed
1: indicates the LSPM ERR.
  • Failed to allocate a token because obtaining interface information by interface index was failed.

  • Failed to allocate a token because the system resources were insufficient.

Possible Causes

The management module failed to allocate a token for LDP.

Procedure

  1. Run the display tunnel-info statistic command to check whether the tunnel management module has enough tunnels.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 569127

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next