No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SEP/6/RCV_CFM_FAULT

SEP/6/RCV_CFM_FAULT

Message

SEP/6/RCV_CFM_FAULT:The SEP receives an error notification from the CFM. (Segment ID=[ULONG], Port Name=[STRING], Fault State=[STRING])

Description

After the SEP segment was associated with CFM, CFM sends a fault notification to the SEP segment through the OAM module when detecting a connectivity fault or a fault recovery event.

Parameters

Parameter Name Parameter Meaning
Segment ID ID of the SEP segment
Port Name Name of the interface added to the SEP segment
Fault State Fault state

Possible Causes

Cause 1: After the SEP segment was associated with CFM, CFM detected that the fault was rectified.

Cause 2: After the SEP segment was associated with CFM, CFM detected a connectivity fault.

Procedure

  1. Cause 1: After the SEP segment was associated with CFM, CFM detected that the fault was rectified.

    This log message indicates a normal situation, and no action is required.

  2. Cause 2: After the SEP segment was associated with CFM, CFM detected a connectivity fault.
    1. Run the display cfm remote-mep command to view the CFM Status field.

      • If the CFM Status field is displayed as Up, it indicates that the CC link is normal. In this case, go to b.
      • If the CFM Status field is displayed as Up, it indicates that CFM detects a CC link fault. In this case, go to b.

    2. Collect configurations and log messages, and then contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 575860

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next