No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SNMP/4/SNMP_MIB_SET_FAILED:MIB node set failure. (UserName=[STRING], SourceIP=[STRING], Version=[STRING], RequestId=[ULONG], ErrorStatus=[ULONG], ErrorIndex=[ULONG], [STRING], VPN=[STRING])


The MIB object was set failed.


Parameter Name Parameter Meaning
UserName Indicates the name of user.
SourceIP Indicates the source IP address.
Version Indicates the version.
RequestId Indicates the ID of a request.
ErrorStatus Indicates error status, including:
  • 0: noError
  • 1: tooBig
  • 2: noSuchName
  • 3: badValue
  • 4: readOnly
  • 5: genError
  • 6: noAccess
  • 7: wrongType
  • 8: wrongLength
  • 9: wrongEncoding
  • 10: wrongValue
  • 11: noCreation
  • 12: inconsistentValue
  • 13: resourceUnavailable
  • 14: commitFailed
  • 15: undoFailed
  • 16: authorizationError
  • 17: notWritable
  • 18: inconsistentName
ErrorIndex Indicates the index of a variable that fails to be set. This log records all variables that need to be set by the NMS. For example, if the fifth variable fails to be set, the value of ErrorIndex is 5.

Indicates OID and value of a node in a Set request. If the node is a password node, the value is displayed as ******.

If a Set request contains many nodes and the information about these nodes cannot be completely displayed in one log, the information is displayed in multiple logs.

If the length of a node's OID exceeds 512 bytes or the total length of a node's OID and value exceeds 1024 bytes, the last part is displayed as an ellipsis (…).


Indicates the name of a VPN instance.

Possible Causes

The information about the SET operation failed on a MIB object was recorded into the log.


  • Determine the cause of the error based on the ErrorStatus field in the log.
  • Locate the error node based on the ErrorIndex field in the log.
  • Determine the cause of the failure to set the node according to the preceding information, and then perform the setting operation again.
  • End.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 576765

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next