No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALML/4/RESOURCE_MODE_DIFF

ALML/4/RESOURCE_MODE_DIFF

Message

ALML/4/RESOURCE_MODE_DIFF:Resource modes mismatch. (Slot=[ULONG1],Tcamszie=[ULONG2],Cfgmode=[ULONG3],Cuurmode=[ULONG4])

Description

The resource modes are different.

Parameters

Parameter Name Parameter Meaning
[ULONG1] Slot ID of the board
[ULONG2] TCAM size
[ULONG3] Configuration mode
[ULONG4] Current mode

Possible Causes

The configured resource mode is different from the resource mode in the flash memory.

Procedure

  • When detecting that the resource modes are different, the system changes the resource mode in the flash memory, and then restarts the LPU. This log message is informational and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 551009

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next