No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Delay Time for the System to Consider a Clock Source Lost

Setting the Delay Time for the System to Consider a Clock Source Lost

Context

Setting the delay time for the system to consider a clock source lost can avoid some mistakes in determining the clock source caused by occasional signal jitter on the network.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    clock hold-off-time hold-off-time source source

    The delay time for the system to consider a clock source lost is set.

    By default, the delay time for the system to consider a clock source lost is 500 ms.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142080

Views: 115235

Downloads: 149

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next