No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the SSM Quality Level to Be Used in Clock Source Selection

Enabling the SSM Quality Level to Be Used in Clock Source Selection


  1. Run:


    The system view is displayed.

  2. Run:

    clock ql-enable [ extend ]

    The SSM quality level is used in clock source selection.

    By default, the SSM quality level is not used in clock source selection. To set clock source IDs to prevent timing loops, you must enable the SSM quality level to extended SSM mode.

Updated: 2019-08-21

Document ID: EDOC1000142080

Views: 113593

Downloads: 149

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next