No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling an AS Port

Disabling an AS Port


In an SVF system, you cannot directly enter the interface view on an AS and disable the interface. You need to run the shutdown interface interface-type interface-number command on the parent to disable the specified AS port.


Running this command can disable only an AS downlink port but not an AS uplink port. If an uplink port has been configured as a downlink fabric port, this port can be disabled.

If an AS is configured in the independent mode, its interfaces cannot be shut down using this command.


  1. Run:


    The system view is displayed.

  2. Run:


    The uni-mng view is displayed.

  3. Run:

    as name as-name

    The AS view is displayed.

  4. Run:

    shutdown interface interface-type interface-number

    The specified port is disabled on the AS.

Updated: 2019-12-28

Document ID: EDOC1000142080

Views: 123496

Downloads: 155

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next