No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring PTP

Monitoring PTP


In routine maintenance, you can run the following command in any view to view the PTP running status.


  • Run the display ptp { all [ config | state ] | interface interface-type interface-number } command to check the PTP configuration and running status.
Updated: 2019-12-28

Document ID: EDOC1000142080

Views: 122584

Downloads: 155

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next