No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Can I Specify the Master Switch?

How Can I Specify the Master Switch?

After you connect cluster cables between two member switches, set the CSS priority of the intended master switch to a larger value and enable the CSS function on it first. This ensures that the switch with the higher CSS priority becomes the master switch.

If you want the other switch in the CSS to be the master switch, run the slave switchover command to perform a master/standby switchover if the original master switch has two MPUs. If the original master switch has only one MPU, power off the switch, and power it on after the standby switch is elected as the new master switch. If you specify a new master switch when the CSS is running, services will be interrupted.

Updated: 2019-08-21

Document ID: EDOC1000142080

Views: 110049

Downloads: 144

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next