No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Powering On or Off a Card

Powering On or Off a Card

Context

When a card is idle, you can power off the card without affecting services to ensure stable system operation and save energy. You can also power on a specified card if service volume increases.

NOTE:

The active MPUs cannot be powered on or off using commands.

Procedure

  1. (Optional) Run:

    display device [ slot slot-id ]

    The card status is displayed.

  2. Power on or off a specified card.

    • Run:

      power on slot slot-id

      The specified card is powered on.

    • Run:

      power off slot slot-id

      The specified card is powered off.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142080

Views: 113987

Downloads: 149

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next