No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying Optical Module Information

Displaying Optical Module Information

Context

If the optical module on an interface is faulty, you can run the display commands to view information about the optical module.

Related Information

Video

Identify a Huawei-Certified Optical Module

Procedure

  • Run the display transceiver [ interface interface-type interface-number | slot slot-id ] [ verbose ] command to view information about the optical module on a specified interface.

FAQ

What Is the Impact of Using Non-Huawei-Certified Switch Optical Modules?

When certifying an optical module, Huawei comprehensively verifies the functions of the optical module to ensure its quality. The functions include the installation and removal, transmit and receive power, signal transmission quality, basic information query, fault tolerance, compatibility, electro magnetic compatibility (EMC), and environmental performance.

The system may fail to obtain information about non-Huawei-certified switch optical modules or obtain incorrect information. You are advised to use Huawei-certified switch optical modules.

When a non-Huawei-certified switch optical module is used, the following problems often occur:
  • The optical module cannot be installed in an optical interface because the optical module structure is nonstandard.

    The structure and size of some non-Huawei-certified switch optical modules do not comply with the MSA agreement. After such an optical module is installed in an optical interface, the neighbor interface cannot have an optical module installed because the non-Huawei-certified switch optical module has a nonstandard size.

  • The device data bus is abnormal because of a data bus defect of the non-Huawei-certified switch optical module.

    Some non-Huawei-certified switch optical modules have data bus design defects. When such an optical module is used on a device, the data bus of the device becomes abnormal, preventing data on the data bus from being read.

  • The edge connector of the optical module has a nonstandard size, damaging the electronic components of the interface.

    The edge connectors of some non-Huawei-certified switch optical modules have a nonstandard size, causing the interface to be short-circuited and damaging the electronic components of the interface.

  • Optical module temperature monitoring is not standardized, causing alarms to be incorrectly generated.

    The temperature monitoring systems of some non-Huawei-certified switch optical modules do not comply with industry specifications, causing a high temperature. As a result, the system incorrectly reports a temperature alarm.

  • The optical module register is set incorrectly, preventing parameters and diagnostic information from being read correctly.

    The A0 registers of some non-Huawei-certified switch optical modules are set incorrectly. As a result, parameters and diagnostic information cannot be read or read incorrectly by the data bus.

  • The optical module design does not comply with the EMC, its anti-electromagnetic interference capability is low, and the optical module brings electromagnetic interference to surrounding devices.

  • The working temperature range of the optical module does not meet requirements, causing the optical power to be reduced at a high temperature. Subsequently, services are interrupted.

How Can I Determine Whether an Optical Module Is a Huawei-Certified Switch Optical Module?

NOTE:

The system may fail to obtain information about non-Huawei-certified switch optical modules or obtain incorrect information. You are advised to use Huawei-certified switch optical modules.

10GE or Lower Speed Modules

Huawei started certification on 10GE or lower speed optical and copper modules for switch products on July 1, 2013.

To determine whether optical or copper modules delivered for Huawei switches before July 1, 2013 are certified ones, contact Huawei technical support.

If your optical or copper modules are delivered after July 1, 2013, use either of the following methods to determine whether they have been certified by Huawei.

Method 1: Check for "HUAWEI" on the label

If an optical or copper module has been certified by Huawei, its label contains "HAUWEI", as shown in Figure 1-8.

Figure 1-8  "HUAWEI" on the label of a Huawei-certified optical module
Method 2: Run the display transceiver command

If an optical or copper module meets the following conditions, it has been certified by Huawei. Otherwise, it is not a Huawei-certified one.

  • In the display elabel command output, the Manufactured field displays a date later than 2013-07-01.

  • In the display version command output, the displayed version is V200R001C00 or later.

  • In the display transceiver command output, the Vendor Name field displays HUAWEI.

40GE and 100GE Modules

Huawei started certification on o40GE and 100GE optical modules for switch products on January 1, 2016.

To determine whether optical modules delivered for Huawei switches before January 1, 2016 are certified ones, contact Huawei technical support.

If your optical modules are delivered after January 1, 2016, use either of the following methods to determine whether they have been certified by Huawei.

Method 1: Check for "HUAWEI" on the label

If an optical module has been certified by Huawei, its label contains "HAUWEI", as shown in Figure 1-8.

Method 2: Run the display transceiver command

If an optical module meets the following conditions, it has been certified by Huawei. Otherwise, it is not a Huawei-certified one.

  • In the display elabel command output, the Manufactured field displays a date later than 2016-01-01.

  • In the display version command output, the displayed version is V200R008 or later.

  • In the display transceiver command output, the Vendor Name field displays HUAWEI.

What Can I Do If the Optical Power Is Low or High?

Fault Description

Optical power alarms occur when two optical interfaces connect to each other.

Optical Power Alarms
BASETRAP_1.3.6.1.4.1.2011.5.25.129.2.17.1 hwOpticalPowerAbnormal     //An alarm indicating abnormal transmit or receive power of an optical module.
BASETRAP/3/OPTPWRABNORMAL: OID [oid] Optical module power is abnormal. (EntityPhysicalIndex=[INTEGER], BaseTrapSeverity=[INTEGER],
 BaseTrapProbableCause=[INTEGER], BaseTrapEventType=[INTEGER], EntPhysicalContainedIn=[INTEGER], EntPhysicalName="[OCTET]", Relati
veResource="[OCTET]", ReasonDescription="[OCTET]")
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.4.5 hwOpticalInvalid 136193   //An alarm indicating a high transmit power of an optical module.
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.4.5 hwOpticalInvalid 136194   //An alarm indicating a low transmit power of an optical module.
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.4.5 hwOpticalInvalid 136195   //An alarm indicating a high receive power of an optical module.
ENTITYTRAP_1.3.6.1.4.1.2011.5.25.219.2.4.5 hwOpticalInvalid 136196   //An alarm indicating a low receive power of an optical module.
ENTITYTRAP/3/OPTICALINVALID:OID [oid] Optical Module is invalid.(Index=[INTEGER], EntityPhysicalIndex=[INTEGER], PhysicalName=\"
[OCTET]\", EntityTrapFaultID=[INTEGER])
Possible Causes
  • The local and remote optical modules have different types and wavelengths.
  • The optical module is incorrectly installed or the optical fiber fails.
  • The fiber connected to the interface is too long or the fiber attenuation is high.
  • The remote transmit power is not within the allowed range.
  • The optical module fails.
Troubleshooting Procedure
NOTE:

Saving the results of each troubleshooting step is recommended. If your troubleshooting fails to correct the fault, you will have a record of your actions to provide technical support personnel.

  1. Check whether the local and remote optical modules have the same wavelength.

    Run the display transceiver [ interface interface-type interface-number | slot slot-id ] [ verbose ] command to check optical module information on the interface. The Wavelength(nm) field in the command output indicates the wavelength of an optical module. If the two optical modules have different wavelengths, replace one optical module to ensure that the two optical modules have the same wavelength.

    If the fault persists, go to step 2.

  2. Check the link connection.

    Remove and install the fiber and optical module to ensure that the fiber and optical module are properly connected. Check whether the fiber connector is damaged or dirty. If so, replace the fiber.

    If the fault persists, go to step 3.

  3. Check the fiber length.

    The fiber length must be shorter than the maximum transmission distance of an optical module. For the maximum transmission distance supported by different optical modules, see Pluggable Modules for Interfaces in the hardware description. If the fiber length exceeds the maximum transmission distance of the optical modules, shorten the fiber length or use optical modules with a longer transmission distance.

    If the fault persists, go to step 4.

  4. Check the transmit optical power on the remote device.

    Ensure that the transmit optical power on the remote device exceeds the lower threshold.

    If the fault persists, go to step 5.

  5. Check whether the fiber type matches the optical module.

    Determine whether the fiber type matches the optical module type according to the following information:
    • A multimode fiber can be used together with multimode fiber.
    • A single-mode fiber can only be used with a single-mode optical module. A single-mode fiber is generally yellow, and a multimode fiber is generally orange.
    • Two connected optical modules must have the same wavelength.
    If the fault persists, go to step 6.
  6. Check the optical module type and vendor.

    Check whether the local and remote devices use optical modules of the same type but from different vendors. If the connected optical modules have the same wavelength and provide short-distance transmission but alarms indicating low or high optical power occur, the two optical modules may be from different vendors. Although these optical modules have the same wavelength, optical power alarms occur because different vendors design different optical power indicators for these optical modules. To rectify the fault, use optical modules of the same vendor.

    If the fault persists, go to step 7.

  7. Replace the parts.

    Using a short fiber loopback test. If the fault cannot be located, replace the optical module or fiber.

    If the fault persists, go to step 8.

  8. Collect the following information and contact technical support personnel:
    • Results of the preceding troubleshooting procedure
    • Configuration file, logs, and alarms of the device

How Can I View Optical Power Information?

NOTE:

The system may fail to obtain information about non-Huawei-certified switch optical modules or obtain incorrect information. You are advised to use Huawei-certified switch optical modules.

You can run the display transceiver interface interface-type interface-number verbose command to view power information of a specified optical module.

<HUAWEI> display transceiver interface gigabitethernet 3/0/0 verbose
GigabitEthernet3/0/0 transceiver information:                                  
-------------------------------------------------------------                   
Common information:                                                             
  Transceiver Type               :1000_BASE_SX_SFP                              
  Connector Type                 :LC                                            
  Wavelength(nm)                 :850                                           
  Transfer Distance(m)           :500(50um),300(62.5um)                         
  Digital Diagnostic Monitoring  :YES                                           
  Vendor Name                    :FINISAR CORP.                                 
  Vendor Part Number             :FTLF8519P2BNL-HW                              
  Ordering Name                  :                                              
-------------------------------------------------------------                   
Manufacture information:                                                        
  Manu. Serial Number            :PEP3L5D                                       
  Manufacturing Date             :2008-12-05                                    
  Vendor Name                    :FINISAR CORP.                                 
-------------------------------------------------------------                   
Alarm information:                                                              
  TX power low                                                                  
-------------------------------------------------------------                   
Diagnostic information:                                                         
  Temperature(°C)                       :39                                     
  Voltage(V)                            :3.31                                   
  Bias Current(mA)                      :6.59                                   
  Bias High Threshold(mA)               :10.50                                  
  Bias Low  Threshold(mA)               :2.50                                   
  Current Rx Power(dBM)                 :-2.23           //Indicate the current receive power of the optical module.                       
  Default Rx Power High Threshold(dBM)  :3.01            //Indicate the default receive power upper alarm threshold of the optical module.                      
  Default Rx Power Low  Threshold(dBM)  :-15.02          //Indicate the default receive power lower alarm threshold of the optical module.                      
  Current Tx Power(dBM)                 :-2.45           //Indicate the current transmit power of the optical module.                       
  Default Tx Power High Threshold(dBM)  :3.01            //Indicate the default transmit power upper alarm threshold of the optical module.                       
  Default Tx Power Low  Threshold(dBM)  :-9.00           //Indicate the default transmit power lower alarm threshold of the optical module.                       
  User Set Rx Power High Threshold(dBM) :3.01            //Indicate the configured receive power upper alarm threshold of the optical module.                       
  User Set Rx Power Low Threshold(dBM)  :-15.02          //Indicate the configured receive power lower alarm threshold of the optical module.                       
  User Set Tx Power High Threshold(dBM) :3.01            //Indicate the configured transmit power upper alarm threshold of the optical module.                       
  User Set Tx Power Low Threshold(dBM)  :-9.00           //Indicate the configured transmit power lower alarm threshold of the optical module.                       
------------------------------------------------------------- 

When the current optical module power is between the upper and lower thresholds, the optical power is normal. When the current optical power exceeds the configured upper alarm threshold, a high optical power alarm is generated. When the current optical power falls below the configured lower alarm threshold, a low optical power alarm is generated.

How Can I View the Optical Module Wavelength?

NOTE:

The system may fail to obtain information about non-Huawei-certified switch optical modules or obtain incorrect information. You are advised to use Huawei-certified switch optical modules.

Two optical modules on the transmit and receive ends must have the same wavelength. You are advised to use the same type of optical modules on the transmit and receive ends.

You can run the display transceiver interface interface-type interface-number command to view the wavelength of a specified optical module.

<HUAWEI> display transceiver interface gigabitethernet 3/0/0
GigabitEthernet3/0/0 transceiver information:                                  
-------------------------------------------------------------                   
Common information:                                                             
  Transceiver Type               :1000_BASE_SX_SFP                              
  Connector Type                 :LC                                            
  Wavelength(nm)             :850                                           
  Transfer Distance(m)           :500(50um),300(62.5um)                         
  Digital Diagnostic Monitoring  :YES                                           
  Vendor Name                    :FINISAR CORP.                                 
  Vendor Part Number             :FTLF8519P2BNL-HW                              
  Ordering Name                  :                                              
-------------------------------------------------------------                   
Manufacture information:                                                        
  Manu. Serial Number            :PEP3L5D                                       
  Manufacturing Date             :2008-12-05                                    
  Vendor Name                    :FINISAR CORP.                                 
-------------------------------------------------------------                   
Alarm information:                                                              
  TX power low                                                                  
-------------------------------------------------------------                   

How Can I View the Optical Module Transmission Distance?

NOTE:

The system may fail to obtain information about non-Huawei-certified switch optical modules or obtain incorrect information. You are advised to use Huawei-certified switch optical modules.

Optical signals sent from different types of sources can transmit over different distances due to negative effects of optical fibers, such as dispersion and attenuation. When connecting optical interfaces, select optical modules and fibers according to the longest signal transmission distance.

You can run the display transceiver interface interface-type interface-number command to view the transmission distance of a specified optical module.

<HUAWEI> display transceiver interface gigabitethernet 3/0/0
GigabitEthernet3/0/0 transceiver information:                                  
-------------------------------------------------------------                   
Common information:                                                             
  Transceiver Type               :1000_BASE_SX_SFP                              
  Connector Type                 :LC                                            
  Wavelength(nm)                 :850                                           
  Transfer Distance(m)       :500(50um),300(62.5um)                         
  Digital Diagnostic Monitoring  :YES                                           
  Vendor Name                    :FINISAR CORP.                                 
  Vendor Part Number             :FTLF8519P2BNL-HW                              
  Ordering Name                  :                                              
-------------------------------------------------------------                   
Manufacture information:                                                        
  Manu. Serial Number            :PEP3L5D                                       
  Manufacturing Date             :2008-12-05                                    
  Vendor Name                    :FINISAR CORP.                                 
-------------------------------------------------------------                   
Alarm information:                                                              
  TX power low                                                                  
-------------------------------------------------------------                   

How Can I View the Temperature, Voltage, and Current of an Optical Module?

NOTE:

The system may fail to obtain information about non-Huawei-certified switch optical modules or obtain incorrect information. You are advised to use Huawei-certified switch optical modules.

You can run the display transceiver interface interface-type interface-number verbose command to view the temperature, voltage, and current of a specified optical module.

<HUAWEI> display transceiver interface gigabitethernet 3/0/0 verbose
GigabitEthernet3/0/0 transceiver information:                                  
-------------------------------------------------------------
Common information:
  Transceiver Type               :UNKNOWN_SFP
  Connector Type                 :LC
  Wavelength(nm)                 :850
  Transfer Distance(m)           :80(50um),30(62.5um),300(OM3)
  Digital Diagnostic Monitoring  :YES
  Vendor Name                    :JDSU
  Vendor Part Number             :PLRXPLSCS4322N
  Ordering Name                  :
-------------------------------------------------------------
Manufacture information:
  Manu. Serial Number            :CB02UF1SW
  Manufacturing Date             :2011-01-09
  Vendor Name                    :JDSU
-------------------------------------------------------------
Alarm information:
  RX loss of signal
  RX power low
-------------------------------------------------------------
Diagnostic information:
  Temperature(°C)                       :33      //Indicate the current temperature of the optical module.
  Voltage(V)                            :3.32    //Indicate the current voltage of the optical module.
  Bias Current(mA)                      :7.31    //Indicate the bias current of the optical module.
  Bias High Threshold(mA)               :10.00   //Indicate the bias current higher threshold of the optical module.
  Bias Low  Threshold(mA)               :2.60    //Indicate the bias current lower threshold of the optical module.
  Current Rx Power(dBM)                 :-29.21
  Default Rx Power High Threshold(dBM)  :1.50
  Default Rx Power Low  Threshold(dBM)  :-14.00
  Current Tx Power(dBM)                 :-1.82
  Default Tx Power High Threshold(dBM)  :-1.00
  Default Tx Power Low  Threshold(dBM)  :-8.00
  User Set Rx Power High Threshold(dBM) :1.50
  User Set Rx Power Low Threshold(dBM)  :-14.00
  User Set Tx Power High Threshold(dBM) :-1.00
  User Set Tx Power Low Threshold(dBM)  :-8.00
-------------------------------------------------------------

Why Can't I Obtain Optical Module Information?

You may fail to obtain information about an optical module in the following situations:
  • The system may fail to obtain information about non-Huawei-certified switch optical modules or obtain incorrect information. You are advised to use Huawei-certified switch optical modules.

  • No optical module is installed.
  • The system does not support the query of the temperature, voltage, current, receive power, and transmit power of the optical module.
  • If the transmit or receive power is NA, the interface does not have any transmit or receive signal and the power is 0.
  • A hardware fault occurs on the optical module. You can replace the optical module for fault locating.

How Can I Determine Whether an Optical Module Is Single-Mode or Multi-Mode?

Optical fibers are classified into single-mode fibers and multi-mode fibers based on core diameters and features. Generally, multi-mode fibers have large core diameters and severe dispersion, so they transmit optical signals over short distances. Single-mode fibers have low dispersion and can transmit optical signals over long distances.

Optical fibers and optical modules must work together. When single-mode optical modules use multi-mode fibers, signal identification is unstable. When multi-mode optical modules use single-mode fibers, the receive power loss is high.

NOTE:

The system may fail to obtain information about non-Huawei-certified switch optical modules or obtain incorrect information. You are advised to use Huawei-certified switch optical modules.

You can run the display transceiver interface interface-type interface-number command to view information about a specified optical module. The displayed transmission distance contains fiber diameter information. In the following command output, you can determine whether an optical module is single-mode or multi-mode optical module based on the fiber diameter. Fiber diameters of 50 um and 62.5 um indicate multi-mode fibers and a diameter of 9 um indicates single-mode fibers.

<HUAWEI> display transceiver interface gigabitethernet 3/0/0

GigabitEthernet3/0/0 transceiver information:                                  
-------------------------------------------------------------                   
Common information:                                                             
  Transceiver Type               :1000_BASE_SX_SFP                              
  Connector Type                 :LC                                            
  Wavelength(nm)                 :850                                           
  Transfer Distance(m)       :500(50um),300(62.5um)                         
  Digital Diagnostic Monitoring  :YES                                           
  Vendor Name                    :FINISAR CORP.                                 
  Vendor Part Number             :FTLF8519P2BNL-HW                              
  Ordering Name                  :                                              
-------------------------------------------------------------                   
Manufacture information:                                                        
  Manu. Serial Number            :PEP3L5D                                       
  Manufacturing Date             :2008-12-05                                    
  Vendor Name                    :FINISAR CORP.                                 
-------------------------------------------------------------                   
Alarm information:                                                              
  TX power low                                                                  
-------------------------------------------------------------                   

What Are the MIB OIDs of Optical Module Information?

The following table describes the MIB OIDs of optical module information.

Object Name

OID

Syntax

Description

Max Access

hwEntityOpticalVendorSn

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.4

OCTET STRING

This object indicates the SN of an optical module.

read-only

hwEntityOpticalTemperature

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.5

Integer32

This object indicates the temperature of an optical module, in °C.

read-only

hwEntityOpticalVoltage

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.6

Integer32

This object indicates the voltage of an optical module, in mV.

read-only

hwEntityOpticalBiasCurrent

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.7

Integer32

This object indicates the bias current of an optical module, in uA.

read-only

hwEntityOpticalRxPower

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.8

Integer32

The power displayed by this object is 100 times the actual power. For example, if the value is 100, the actual power is 1dBm.

read-only

hwEntityOpticalTxPower

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.9

Integer32

This object indicates the transmit power of the optical module (unit: dBm).

The power displayed by this object is 100 times the actual power. For example, if the value is 100, the actual power is 1dBm.

read-only

hwEntityOpticalVenderPn

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.25

OCTET STRING

This object indicates the PN of an optical module.

read-only

What Does Alarm information Mean in Optical Module Information?

You can run the display transceiver interface interface-type interface-number verbose command to view information about a specified optical module. In the command output, Alarm information indicates the fault that occurs on the optical module. Table 1-4 describes possible alarm information and meaning.

<HUAWEI> display transceiver interface gigabitethernet 3/0/0 verbose
GigabitEthernet3/0/0 transceiver information:                                  
-------------------------------------------------------------                   
Common information:                                                             
  Transceiver Type               :1000_BASE_SX_SFP                              
  Connector Type                 :LC                                            
  Wavelength(nm)                 :850                                           
  Transfer Distance(m)           :500(50um),300(62.5um)                         
  Digital Diagnostic Monitoring  :YES                                           
  Vendor Name                    :FINISAR CORP.                                 
  Vendor Part Number             :FTLF8519P2BNL-HW                              
  Ordering Name                  :                                              
-------------------------------------------------------------                   
Manufacture information:                                                        
  Manu. Serial Number            :PEP3L5D                                       
  Manufacturing Date             :2008-12-05                                    
  Vendor Name                    :FINISAR CORP.                                 
-------------------------------------------------------------                   
Alarm information:                                                              
  TX power low                                                                  
-------------------------------------------------------------                   
Diagnostic information:                                                         
  Temperature(°C)                       :39                                     
  Voltage(V)                            :3.31                                   
  Bias Current(mA)                      :6.59                                   
  Bias High Threshold(mA)               :10.50                                  
  Bias Low  Threshold(mA)               :2.50                                   
  Current Rx Power(dBM)                 :-2.23         
  Default Rx Power High Threshold(dBM)  :3.01                     
  Default Rx Power Low  Threshold(dBM)  :-15.02                     
  Current Tx Power(dBM)                 :-2.45            
  Default Tx Power High Threshold(dBM)  :3.01                   
  Default Tx Power Low  Threshold(dBM)  :-9.00                      
  User Set Rx Power High Threshold(dBM) :3.01                     
  User Set Rx Power Low Threshold(dBM)  :-15.02                       
  User Set Tx Power High Threshold(dBM) :3.01                          
  User Set Tx Power Low Threshold(dBM)  :-9.00          
------------------------------------------------------------- 
Table 1-4  Alarm information and meaning

Alarm

Meaning

TX fault

A transmission fault occurs.

RX loss of signal

Received signals are lost.

Transceiver info I/O error

Module information read and write error occurs.

Transceiver info checksum error

Module information checksum is incorrect.

Transceiver type not supported by port hardware

An interface does not support the module type.

Temp high

The temperature is high.

Temp low

The temperature is low.

Voltage high

The voltage is high.

Voltage low

The voltage is low.

TX bias high

The bias current is high.

TX bias low

The bias current is low.

TX power high

The transmit power is high.

TX power low

The transmit power is low.

RX power high

The receive power is high.

RX power low

The receive power is low.

How Can I View the Optical Attenuation?

You need to view the current optical power in optical module information to determine whether the optical power is attenuated.

How Can I Determine Whether an Interface Has an Optical Module?

NOTE:

The system may fail to obtain information about non-Huawei-certified switch optical modules or obtain incorrect information. You are advised to use Huawei-certified switch optical modules.

Run the display transceiver command to view optical module information.
<HUAWEI> display transceiver                                                                                                        
                                                                                                                                    
GigabitEthernet3/1/12 transceiver information:                                                                                      
-------------------------------------------------------------                                                                       
Common information:                                                                                                                 
  Transceiver Type               :1000_BASE_SX_SFP                                                                                  
  Connector Type                 :LC                                                                                                
  Wavelength(nm)                 :0                                                                                                 
  Transfer Distance(m)           :275(OM1),550(OM2),1000(OM3)                                                                       
  Digital Diagnostic Monitoring  :NO                                                                                                
  Vendor Name                    :AGILENT                                                                                           
  Vendor Part Number             :HFBR-5710L                                                                                        
  Ordering Name                  :                                                                                                  
-------------------------------------------------------------                                                                       
Manufacture information:                                                                                                            
  Manu. Serial Number            :AJ051801EK                                                                                        
  Manufacturing Date             :2005-05-03                                                                                        
  Vendor Name                    :AGILENT                                                                                           
-------------------------------------------------------------                                                                       
Alarm information:                                                                                                                  
  RX loss of signal                                                                                                                 
-------------------------------------------------------------                                                                       
                                                                                                                                    
GigabitEthernet3/1/13 transceiver information:                                                                                      
-------------------------------------------------------------                                                                       
Common information:                                                                                                                 
  Transceiver Type               :1000_BASE_SX_SFP                                                                                  
  Connector Type                 :LC                                                                                                
  Wavelength(nm)                 :0                                                                                                 
  Transfer Distance(m)           :275(OM1),550(OM2),1000(OM3)                                                                       
  Digital Diagnostic Monitoring  :NO                                                                                                
  Vendor Name                    :AVAGO                                                                                             
  Vendor Part Number             :HFBR-5710L                                                                                        
  Ordering Name                  :                                                                                                  
-------------------------------------------------------------                                                                       
Manufacture information:                                                                                                            
  Manu. Serial Number            :AM070864WZ                                                                                        
  Manufacturing Date             :2007-02-25                                                                                        
  Vendor Name                    :AVAGO                                                                                             
-------------------------------------------------------------                                                                       
Alarm information:                                                                                                                  
  RX loss of signal                                                                                                                 
-------------------------------------------------------------  
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142080

Views: 109673

Downloads: 144

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next