No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling the NTP Server Function

Enabling the NTP Server Function


After NTP-related commands are configured on a device, the device automatically disables the NTP server function. This prevents external devices from synchronizing their clocks with the device clock. The device also records the ntp-service server disable and ntp-service ipv6 server disable commands to its configuration file. To use the device as an NTP server, enable the NTP server function on it.


  1. Run:


    The system view is displayed.

  2. Run:

    undo ntp-service [ ipv6 ] server disable

    The NTP server function is enabled on the device.

    By default, the NTP server function is disabled.

Updated: 2019-12-28

Document ID: EDOC1000142080

Views: 122591

Downloads: 155

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next