No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting a Delay Time Before Service Ports Restore to the Up State

Setting a Delay Time Before Service Ports Restore to the Up State

Context

After a standby switch completes a restart, it synchronizes its configuration to the master switch and restores all ports to the Up state. During the process, the CPU usage is very high. To prevent service interruption caused by a high CPU usage, you can set the delay time before service ports restore to the Up state.

Procedure

  1. Run the system-view command to enter the system view.
  2. Run the css standby port delay time command to set a delay time before service ports restore to the Up state.

    By default, the delay time is 0. That is, the ports restore to the Up state immediately after the switch completes a restart.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142080

Views: 107094

Downloads: 141

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next