No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Client Clock

Configuring the Client Clock


  1. Run:


    The system view is displayed.

  2. Run:

    ntp-service { max-sys-poll max-sys-poll-value | spike-offset spike-offset-value | sync-interval interval } *

    The following are configured:

    • The maximum polling interval. The default interval is 217s.
    • The timestamp difference between packets sent by the clock server and received by the client. The default difference is 128 ms.
    • The interval at which synchronization of the client clock occurs. The default interval is 600 seconds.

  3. Run:

    ntp-service max-distance max-distance-value

    The maximum NTP synchronization distance is configured.

    By default, The maximum NTP synchronization distance is 1 second.

Checking the Configuration

  • Run the display current-configuration | include ntp command to view NTP configuration.
Updated: 2019-12-28

Document ID: EDOC1000142080

Views: 123985

Downloads: 155

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next