No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying the Device Serial Number

Displaying the Device Serial Number

Context

Each device has a unique equipment serial number (ESN). If you require technical assistance or need to apply for a license, you need to provide the device serial number.

Procedure

  • Run the display esn command to view the serial number of a device.
  • Run the display device manufacture-info [ slot slot-id | backplane ] command to view device manufacturing information, including the serial number and manufacturing date.

FAQ

How Can I View the Serial Number of a Device?

Method 1: Obtain the Chassis Serial Number by Using a Command

On a standalone device

Run the display elabel backplane command to view electronic label information. In the command output, BarCode specifies the chassis serial number. The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding chassis parameters.
<HUAWEI> display elabel backplane
Info: It is executing, please wait...

[BackPlane_1]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0

[Board Properties]
BoardType=ET1D2BAKL
BarCode=2102113089P0BB000881
Item=02113089
......

In a CSS

Log in to the master switch through Telnet or the Console port, and run the display elabel backplane chassis chassis-id command in the user view to view electronic label information. chassis-id specifies the chassis ID, and BarCode specifies the chassis serial number. The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding chassis parameters.
<HUAWEI> display elabel backplane chassis ?
  INTEGER<1-2>  Chassis ID                                                      
 
<HUAWEI> display elabel backplane chassis 2
Info: It is executing, please wait...                                           
                                                                                
[BackPlane_2]                                                                   
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0

[Board Properties]                                                              
BoardType=ET1D2BAKL
BarCode=2102113089P0BB000881                                                        
Item=02113549                                                                   
......
NOTE:

You can run the display device manufacture-info command to check the serial number obtained from the electronic label.

Method 2: Obtain the Chassis Serial Number Through the Web System

When the web system is enabled on a device, view the chassis serial number through the web system.

EasyOperation web system

Log in to a device through the web system and click Monitor on the toolbar to enter the Monitor page. You can view device information, including the chassis serial number, as shown in Figure 1-1.

Figure 1-1  System Description

Web system classical version

Log in to a device through the web system and click Device Summary on the toolbar to view device information, including the chassis serial number, as shown in Figure 1-2.

Figure 1-2  System Description
Method 3: Obtain the Chassis Serial Number Onsite
The chassis serial number label of the S12700 is attached to the upper right corner on the rear side of the chassis, as shown in Figure 1-3.
Figure 1-3  Location of the serial number label (An S12708 chassis is used as an example.)

How Can I View the Serial Number of a Card?

Method 1: Obtain the Board Serial Number by Using a Command
Run the display elabel command to view electronic label information, and select the slot ID according to the command prompt information. In the command output, BarCode specifies the board serial number. The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding board parameters.
<HUAWEI> display elabel ?
  <1-1>      The present chassis                                                
  backplane  Backplane                                                          
  brief      Display information briefly                                        
  <cr> 
<HUAWEI> display elabel 1/?
  <4,6-8>                                 <CMU1>
  <FAN1-FAN2>                             <PWR1-PWR2>
<HUAWEI> display elabel 1/6 brief
Info: It is executing, please wait...                                           
                                                                                
                                                                                
[Slot_6]                                                                       
/$[Board Integration Version]                                                   
/$BoardIntegrationVersion=3.0                                                   
                                                                                
                                                                                
[Main_Board]                                                                    
/$[ArchivesInfo Version]                                                        
/$ArchivesInfoVersion=3.0                                                       
                                                                                
                                                                                
[Board Properties]                                                              
BoardType=ET1D2S08SX1E
BarCode=020LVF6TBB000043                                                 
Item=03020LVF                                                                    
......
NOTE:

You can run the display device manufacture-info command to check the serial number obtained from the electronic label.

Method 2: Obtain the Board Serial Number Through the Web System (Supported only on MPUs and LPUs)

When the web system is enabled on a device, view the board serial number through the web system.

EasyOperation web system

Log in to the switch through the web system, and click Monitor on the toolbar to enter the Monitor page. You can view board information. When you move the mouse on a board, basic information about the board is displayed, including port, version, and serial number, as shown in Figure 1-4.

Figure 1-4  Basic board information

Web system classical version

Log in to the switch through the web system, and click Device Summary on the toolbard to enter the Device Summary page. Click the corresponding board on the switch to enter the Board Information page. You can view the Slot Basic Information tab. On this tab, you can view basic board information, including the board serial number, as shown in Figure 1-5.

Figure 1-5  Basic slot information
Method 3: Obtain the Board Serial Number Onsite

You can obtain the board serial number onsite. The location of a board serial number label varies.

  • The serial number label is on the upper right corner of the board panel, as shown in Table 1-1.
  • The serial number label is on the upper left corner of the board panel, as shown in Table 1-2.
Table 1-1  List of boards (The serial number label is on the upper right corner of the board panel.)

Switch Series

Serial Number Label Type

Board Model

S12700

One-dimensional label

EH1D200CMU00, EH1D2PS00P00

Table 1-2  List of boards (The serial number label is on the upper left corner of the board panel.)

Switch Series

Serial Number Label Type

Board Model

S12700

Two-dimensional label

ET1D2MPUA000, ET1D2SFUA000, ET1D2SFUD000, ET1D2SFUC000, ET1D2X48SEC0, ET1D2G48SX1E, ET1D2G48TX1E, ET1D2S04SX1E, ET1D2S08SX1E, ET1D2G48SEA0, ET1D2G48SEC0, ET1D2G24SEC0, ET1D2G48TEA0, ET1D2G48TEC0, ET1D2X04XEA0, ET1D2X04XEC1, ET1D2T36SEA0, ET1D2X12SSA0, ET1D2X16SSC0, ET1D2L02QSC0, ET1D2L08QSC0, EH1D2VS08000, ET1D2IPS0S00, ET1D2FW00S00, ET1D2FW00S01, ET1D2FW00S02, ACU2, ET1D2X16SSC2, ET1D2X32SSC0, ET1D2C02FEE0, ET1D2MPUBC00, ET1D2SFUB000, EH1D2L08QX2E, ET1D2X32SX2H, ET1D2C04HX2H, ET1D2X32SX2S, ET1D2S24SX2S, ET1D2S16SX2S, ET1D2C04HX2S, ET1D2H02QX2S, ET1D2X48SX2S, ET1D2X32SX2E, ET1D2S24SX2E, ET1D2S16SX2E, ET1D2C04HX2E, ET1D2H02QX2E

How Can I View the Serial Number of a Power Module?

Method 1: Obtain the Power Module Serial Number by Using a Command
Run the display elabel command to view electronic label information, and select the power module number according to the command prompt information. In the command output, SN specifies the power module serial number.
<HUAWEI> display elabel ?
  <1-1>      The present chassis                                                
  backplane  Backplane                                                          
  brief      Display information briefly                                        
  <cr> 
<HUAWEI> display elabel 1/?
  <5,8,13,16>                             <CMU1>
  <FAN1-FAN5>                             <PWR1-PWR4>
<HUAWEI> display elabel 1/PWR1
Info: It is executing, please wait...                                           
                                                                                
[Slot_21]                                                                       
/$[Board Integration Version]                                                   
/$BoardIntegrationVersion=3.0                                                   
                                                                                
                                                                                
[Main_Board]                                                                    
DATE=13_02_08                                                                   
SN=2102310JFA6TGC907205  
NOTE:

The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding power module parameters.

Method 2: Obtaining the Power Module Serial Number Onsite

You can obtain the power module serial number onsite, as shown in Table 1-3.

Table 1-3  Location of the power module serial number label

Power Module Type

Serial Number Label Location

  • 2200 W DC power module

  • 2200 W AC power module

The serial number label is attached in the barcode slot on the left shell, as shown in Figure 1-6.

Figure 1-6  Location of the serial number label (A 2200 W DC power module is used as an example.)

How Can I View the Serial Number of a Fan Module?

Method 1: Obtain the Fan Module Serial Number by Using a Command
Run the display elabel command to view electronic label information, and select the fan module number according to the command prompt information. In the command output, BarCode specifies the fan module serial number.
<HUAWEI> display elabel ?
  <1-1>      The present chassis                                                
  backplane  Backplane                                                          
  brief      Display information briefly                                        
  <cr> 
<HUAWEI> display elabel 1/?
  <5,8,13,16>                             <CMU1>
  <FAN1-FAN5>                             <PWR1-PWR4>
<HUAWEI> display elabel 1/FAN2
Info: It is executing, please wait...                                           
                                                                                
[Slot_18]                                                                       
/$[Board Integration Version]                                                   
/$BoardIntegrationVersion=3.0                                                   
                                                                                
                                                                                
[Main_Board]                                                                    
/$[ArchivesInfo Version]                                                        
/$ArchivesInfoVersion=3.0                                                       
                                                                                
                                                                                
[Board Properties]                                                              
BoardType=LE02FCMC                                                              
BarCode=2103010JTF0123456789                                             
Item=02120995                                                                   
......
NOTE:

The command format may vary according to versions. You can enter a question mark (?) to obtain the command prompt information and select the corresponding fan module parameters.

Method 2: Obtaining the Fan Module Serial Number Onsite

You can obtain the fan module serial number onsite. The fan module serial number label of the S12700 is attached on the lower right corner at the front side and is a two-dimensional label, as shown in Figure 1-7.

Figure 1-7  Location of the serial number label (An S12700 fan module)

How Can I View the Serial Number of an Optical Module?

Method 1: Run the display Command to View the Serial Number
  • Run the display elabel command to view the electronic label of an optical module. BarCode indicates the serial number of the optical module.
    <HUAWEI> display elabel
    ......
    [Port_XGigabitEthernet4/0/1]
    /$[ArchivesInfo Version]
    /$ArchivesInfoVersion=3.0
    
    
    [Board Properties]
    BoardType=PLRXPLSCS4322N
    BarCode=CB02UF1SW
    Item=
    Description=10300Mb/sec-850nm-LC-33(OM1),82(OM2),300(OM3),400(OM4)
    Manufactured=2011-01-09
    /$VendorName=JDSU
    IssueNumber=
    CLEICode=
    BOM=
    ......
  • Run the display transceiver interface interface-type interface-number command to view information about a specified optical module. Manu. Serial Number indicates the serial number of the optical module.
    <HUAWEI> display transceiver interface gigabitethernet 9/0/21
    
    GigabitEthernet9/0/21 transceiver information:
    -------------------------------------------------------------
    Common information:
      Transceiver Type               :UNKNOWN_SFP
      Connector Type                 :LC
      Wavelength(nm)                 :850
      Transfer Distance(m)           :80(50um),30(62.5um),300(OM3)
      Digital Diagnostic Monitoring  :YES
      Vendor Name                    :JDSU
      Vendor Part Number             :PLRXPLSCS4322N
      Ordering Name                  :
    -------------------------------------------------------------
    Manufacture information:
      Manu. Serial Number        :CB02UF1SW
      Manufacturing Date             :2011-01-09
      Vendor Name                    :JDSU
    -------------------------------------------------------------
    Alarm information:
      RX loss of signal
      RX power low
    -------------------------------------------------------------
Method 2: View the Label Attached on an Optical Module to View the Serial Number

You can check the serial number on the label attached to the optical module.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142080

Views: 115239

Downloads: 149

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next