No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Device Management

This document describes the principles and configurations of the Device Management features, and provides configuration examples of these features.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing NTP Statistics

Clearing NTP Statistics

Context

NOTE:

NTP statistics cannot be recovered after being cleared with the reset ntp-service statistics packet command. Exercise caution when using this command.

Procedure

  • Run the reset ntp-service statistics packet [ ipv6 | peer [ ip-address [ vpn-instance vpn-instance-name ] | ipv6 [ ipv6-address [ vpn-instance vpn-instance-name ] ] ] ] command to clear statistics on NTP packets or symmetric peers.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142080

Views: 107600

Downloads: 141

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next