Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration
Procedure
- Run the display stp [ vlan vlan-id ] [ interface interface-type interface-number | slot slot-id ] [ brief ] command to check the spanning tree status and statistics.
- Run the display stp [ vlan vlan-id ] active command to check details of and statistics on spanning trees of all ports in Up state.
- Run the display stp [ vlan vlan-id ] bridge { root | local } command to check the spanning tree status of the local bridge and root bridge.
- Run the display stp global command to check the summary of the spanning tree protocol.
- Run the display stp region-configuration command to check the mapping between instances and VLANs.