No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R010C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the MSTP Mode

Configuring the MSTP Mode


Before configuring basic MSTP functions, set the working mode of a switch to MSTP. MSTP is compatible with STP and RSTP.


  1. Run:


    The system view is displayed.

  2. Run:

    stp mode mstp

    The working mode of the switch is set to MSTP. By default, the working mode is MSTP.

    MSTP can recognize RSTP BPDUs and, conversely, RSTP can recognize MSTP BPDUs. However, MSTP and STP cannot recognize each other's BPDUs. To enable devices running different spanning tree protocols to interwork with each other, interfaces of an MSTP-enabled switch connected to devices running STP automatically transition to STP mode; other interfaces continue to work in MSTP mode.

Updated: 2019-08-21

Document ID: EDOC1000142081

Views: 257710

Downloads: 408

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next