No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Group VLAN for a Subordinate VLAN

Configuring a Group VLAN for a Subordinate VLAN

Context

A VLAN associated with a group interface is called a group VLAN. Group interfaces in a group VLAN can communicate with each other.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    vlan vlan-id

    The view of a created principal VLAN is displayed.

  3. Run:

    subordinate group { vlan-id1 [ to vlan-id2 ] } &<1-10>

    A group VLAN is configured for the subordinate VLAN.

    A maximum of 128 group VLANs can be configured for a principal VLAN.

    The VLAN ID assigned to a group VLAN cannot be used to configure a VLANIF interface, super-VLAN, or sub-VLAN. Additionally, it is not recommended that this VLAN ID be used to configure VLAN mapping and VLAN stacking.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142081

Views: 256331

Downloads: 408

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next