Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring ERPSv1
If there is no link fault on a ring network, ERPS can eliminate loops on the Ethernet network. If a link fault occurs on the ring network, ERPS can quickly restore communication between nodes on the ring network.
- Creating an ERPS Ring
- Configuring the Control VLAN
- Configuring an ERP Instance and Activating the Mapping Between the ERP Instance and VLAN
- Adding a Layer 2 Port to an ERPS Ring and Configuring the Port
Role
- (Optional) Configuring Timers in an ERPS Ring
- (Optional) Configuring the MEL Value
- (Optional) Configuring Association Between ERPS and Ethernet CFM
- Checking the Configuration