Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Link Type of a Port
Procedure
- Run:
system-viewThe system view is displayed.
- Run:
interface interface-type interface-number
The view of the interface that participates in spanning tree calculation is displayed.
- Run:
stp point-to-point { auto | force-false | force-true }
The link type of the interface is set.
By default, the link type of a port is auto.
If the Ethernet port works in full-duplex mode, the port is connected to a P2P link. You can specify force-true to implement fast convergence.
If the Ethernet port works in half-duplex mode, specify force-true to forcibly set the link type to P2P to implement fast convergence.
In other situations, specify auto so that the port identifies whether it is connected to a P2P link.