No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Switches Connecting to Transmission Devices Through Link Aggregation

Switches Connecting to Transmission Devices Through Link Aggregation

In Figure 3-15, one core site and multiple access sites are deployed. The sites are far away from each other, so transmission devices need to be deployed between devices to ensure communication. At each site, link aggregation is deployed between the switch and the transmission device to improve reliability.

  • The link aggregation mode on the transmission device must be the same as that of the switch. Configure the transmission device according to its operation guide.
Figure 3-15  Switches connecting to transmission devices through link aggregation
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142081

Views: 260456

Downloads: 412

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next