Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Extended MAC Entry Resource Mode
Context
When the switch transmits heavy traffic, MAC address entries increase accordingly. However, the switch has a limited space for MAC address entries. If the MAC address table size cannot meet service requirements, service running efficiency is reduced. The LPUs of the switch provide the extended entry space register. You can configure an extended MAC entry resource mode to increase the MAC address table size.
Procedure
- (Optional) Run:
display resource-assign configurationThe extended entry resource mode is displayed.
- Run:
system-viewThe system view is displayed.
- Run:
assign resource-mode slot slot-id mode enhanced-macThe extended MAC entry resource mode is configured.
After the extended MAC entry resource mode is configured, you must restart the LPU of the switch to make the configuration take effect.
