Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Layer 2 Protocol Transparent Transmission on an Interface
Context
Perform the following operations on PEs based on the required Layer 2 protocol transparent transmission mode.
The l2protocol-tunnel and l2protocol-tunnel vlan commands cannot specify the same protocol type on the same interface. Otherwise, the configurations conflict.
Procedure
- Run:
system-viewThe system view is displayed.
- Run:
interface interface-type interface-number
The user-side interface view is displayed.
- Run:
port link-type hybridThe link type of the interface is set to hybrid.
- Run:
port hybrid pvid vlan vlan-id
The default VLAN of the interface is configured.
- Run:
port hybrid untagged vlan vlan-id
The interface is added to the default VLAN in untagged mode.
- Run:
l2protocol-tunnel { all | protocol-type | user-defined-protocol protocol-name } enable
Layer 2 protocol transparent transmission is enabled on the interface.