No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the Maximum Transmission Rate of an Interface

Setting the Maximum Transmission Rate of an Interface

Context

If more BPDUs are sent from an interface within a Hello timer interval, more system resources are consumed. Setting a proper transmission rate (packet-number) on an interface prevents excess bandwidth usage when network flapping occurs.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    interface interface-type interface-number

    The view of an Ethernet interface participating in STP calculation is displayed.

  3. Run:

    stp transmit-limit packet-number

    The maximum transmission rate of BPDUs in a specified period of time is set for the interface.

    By default, an interface sends a maximum of six BPDUs per second. If the same maximum transmission rate of BPDUs needs to be set for each interface on a device, run the stp transmit-limit (system view) command.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142081

Views: 257339

Downloads: 408

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next