(Optional) Setting the LACP System Priority
Context
LACP system priority differentiates priorities of devices at both ends. In LACP mode, active interfaces selected by devices at both ends must be consistent; otherwise, the LAG cannot be set up. To keep active interfaces consistent at both ends, you can set the priority of one device to be higher than the other device. The device with a lower priority will select active interfaces based on those selected by the device with a higher priority.
Procedure
- Run:
system-viewThe system view is displayed.
- Run:
lacp priority priority
The LACP priority is set.
A smaller priority value indicates a higher LACP priority. By default, the LACP priority is 32768.
The device with a smaller priority value functions as the Actor. If both devices have the same priority, the device with a smaller MAC address functions as the Actor.