Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RRPP Configuration
This chapter describes how to configure the Rapid Ring Protection Protocol (RRPP) to prevent loops and implement fast convergence on ring networks.
- Introduction to RRPP
- Principles
- Application Scenarios
- Configuration Task Summary
- Licensing Requirements and Limitations for RRPP
- Default Configuration
- Configuring RRPP
RRPP prevents loops when a ring is complete and implements fast convergence to rapidly restore communication between nodes on the ring when the ring fails. - Configuring RRPP Snooping
RRPP snooping is a technology that notifies the VPLS network of changes in the RRPP ring. After RRPP snooping is enabled on sub-interfaces or VLANIF interfaces, the VPLS network can transparently transmit RRPP packets, detect changes on the RRPP ring, and upgrade forwarding entries, ensuring that traffic can be rapidly switched to a non-blocking path. - Maintaining RRPP
- Configuration Examples
- Common Configuration Errors
- FAQ
Previous
