No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration

Procedure

  • Run the display dot1q information termination [ interface interface-type interface-number [.subinterface-number ] ] command to check dot1q termination sub-interface information.
  • Run the display vsi [ name vsi-name ] [ verbose ] command to check VSI information.
  • Run the display mpls static-l2vc command to check static VC information.
  • Run the display mpls l2vc command on the PE to check Martini VLL information on the local PE.
  • Run the display mpls l2vc remote-info command on the PE to check Martini VLL information on the remote PE.
  • Run the display vll ccc [ ccc-name | type { local | remote } ] command to check CCC connection information.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142081

Views: 271341

Downloads: 420

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next