No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MSTP Fast Convergence

MSTP Fast Convergence

MSTP supports both ordinary and enhanced Proposal/Agreement (P/A) mechanisms:
  • Ordinary P/A

    Ordinary P/A mechanism supported by MSTP is implemented in the same manner as that supported by RSTP. For details, see RSTP Technology Details.

  • Enhanced P/A

    Figure 15-8  Enhanced P/A mechanism

    Enhanced P/A works as follows:

    1. At the beginning of the negotiation, all devices consider themselves as the root bridge, and all ports on the root bridge are designated ports in Discarding state. When the synced variable is set to 1, the Proposal and Agreement fields are set to 1. The upstream device sends a proposal to the downstream device, indicating that the port connecting to the downstream device wants to enter the Forwarding state. After receiving this BPDU, the downstream device sets its port connected to the upstream device as the root port, and blocks all non-edge ports.

    2. The upstream device sends an agreement BPDU. After receiving this BPDU, the root port enters the Forwarding state.

    3. The downstream device replies with an agreement BPDU. After receiving this BPDU, the upstream device sets its port connected to the downstream device as the designated port, and the port enters the Forwarding state.

By default, Huawei switches use fast transition in enhanced P/A. To enable a Huawei switch to communicate with a third-party device that uses fast transition in common P/A, configure the Huawei switch to use ordinary P/A.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142081

Views: 258418

Downloads: 408

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next