No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Traffic Is Unevenly Load Balanced Among Eth-Trunk Member Interfaces
Because the Load Balancing Mode Is Incorrect
Traffic Is Unevenly Load Balanced Among Eth-Trunk Member Interfaces
Because the Load Balancing Mode Is Incorrect
Fault Description
Traffic is unevenly load
balanced among Eth-Trunk member interfaces due to an incorrect load
balancing mode.
Procedure
Run the display eth-trunk command to check whether the load
balancing mode of the Eth-Trunk meets your network requirements.
For example, source or destination IP address-based load balancing
is not recommended in Layer 2 networking.
Run the load-balance command to set an appropriate load
balancing mode.