Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Statistics on MSTP Topology Changes
Procedure
- Run the display stp [ process process-id ] [ instance instance-id ] topology-change command to view the statistics
about MSTP topology changes.
In the case of a non-zero process, the stp process process-id command must be used to create a process before the display stp [ process process-id ] [ instance instance-id ] topology-change command is used.
- Run the display stp [ process process-id ] [ instance instance-id ] [ interface interface-type
interface-number | slot slot-id ] tc-bpdu statistics command to view the statistics about TC/TCN packets.
In the case of a non-zero process, the stp process process-id command must be used to create a process before the display stp [ process process-id ] [ instance instance-id ] [ interface interface-type interface-number | slot slot-id ] tc-bpdu statistics command is used.