No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R010C00 Configuration Guide - Ethernet Switching

This document describes the configuration of Ethernet services, including configuring link aggregation, VLANs, Voice VLAN, VLAN mapping, QinQ, GVRP, MAC table, STP/RSTP/MSTP, SEP, and so on.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
What Is the Function of Automatic Edge-port Detecting?

What Is the Function of Automatic Edge-port Detecting?

After STP is enabled on a port, edge-port detecting is started automatically. If the port fails to receive BPDU packets within (2 x Hello Time + 1) seconds, the port is set to an edge port. Otherwise, the port is set to a non-edge port. If the stp edged-port enable or stp edged-port disable command is executed in the interface view or the stp edged-port default command is configured in the system view, automatic detection of the edge port becomes invalid.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142081

Views: 254812

Downloads: 408

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next